All the Zeolite Reactor range are now fitted with Prongs to the inner chamber to eliminate clogging of media .. so allowing freer movement of media.

 

 

Operation of the Zeolite Reactor.

To clean the material, push and pull the rod appr. 15-20 times. Keep the filter pump running during the cleaning process. Simple, fast and easy removal of mulm and deposits from the Zeolite (takes just a minute). It is important to clean the Zeolite daily. For an enhanced nitrate and phosphate removal you can run the Zeolite in the reactor in an alternating environment of aerobic and anaerobic conditions. The micro-organisms/bacteria will aspirate more nitrate and phosphate then. This can be achieved by switching the pump of the filter on and off at an interval of 3 hours (the material must not be exposed to air while pump is off). After several years with the Zeolite reactor we recognized that after cleaning corals use the outcoming slimy mulm which is a valuable kind of bacteria plankton that is absorbed by many corals which in turn leads to more intense coloration.

Furthermore it improves the keeping of Goniopora, Alveopora, horn corals and Heliofungia without problems.

^isaprocart^

   Reactor Capacity  : 700mls.

Pump requirement: 300-400lph

Hose: 12mm (use 10mm piping for a nice water tight fit)

Comes complete with control valve

 

Dimensions (mm):

Height:         400

Column Dia: 90

Footprint:    130 x 130

Quantity:
Buy Now:
£44.95

This reactor is designed to hang on the side of aquarium or sump. The hang on bracket will cater for bracing of 25mm or less. If you would like a wider bracket fitted, please contact us with the size required and a bracket can be manufactured to fit.

The return pipe is supplied loose, so you can be fit your requirements.

 

Reactor Capacity  : 700mls.

Pump requirement: 300-400lph

Hose: 12mm (use 10mm piping for a nice water tight fit)

Comes complete with control valve

 

Dimensions (mm):

Height:         400

Column Dia: 90

Footprint:    130 x 130

Quantity:
Buy Now:

Reactor Capacity: 1.2 litres.

Pump requirement : 500-1000lph

Hose: 12mm (use 10mm piping for a nice water tight fit)

Comes complete with control valve

 

Dimensions (mm):

Height:         550

Column Dia: 90

Footprint:    130 x 130

Quantity:
Buy Now: