The lighting is provided by a 12v LED contained in a quartz sleeve.

The quartz sleeve will actively cool the LED lights.

 

The Leds used are Red/ Blue, with of ratio of 4:1.

Red 625-660nm; Blue: 450-465nm

These reactors are designed as a free standing unit (pressurised).

They can be placed in cabinet.. in or out of the sump.. or whatever suits your setup.


 

 

 

 

^isaprocart^

 

Quantity:
Buy Now:

Algae Reactor A50 (50gals/ 200l) Full Kit. For removal of phosphate and nitrate from Marine and Freshwater systems.

This kit uses the PO4 150 reactor as the basis for this kit. The waterproof leds are to be wrapped around the reactor body and held in place with 3 x cables ties (supplied).

Sponges can be removed and just the media trays can be used. Algae can then be tired to the media trays with cable ties etc. This makes a cheap but effective way to help remove phosphate and nitrate from your system... with a little help of some cheato (algae).

Designed as a free-standing, in sump or as a hang-on reactor. Please state on purchase if you would like a hang-on bracket fitted... as the reactor will be sent without a bracket otherwise.

Kit includes: Algae (PO4 150) reactor, Maxijet 500 Pump, 2m Piping, 12v LED strip (1.5m), control valve, 12v adapter and 3 x cable ties. The LEDs supplied will be a Full Daylight Spectrum.

Algae Capacity: 1.5l ( Algae purchased separately ) .

Power Consumption : 21w Dimensions (mm):

Height: 400 Footprint: 130 Column Dia: 90 Hosetail Dia:12

Quantity:
Buy Now:

This algae reactor is a purpose built device for the successful culture of chaetomorpha (Marine) and Hortwort or similar (Freshwater) to remove phosphate and nitrate from your aquatic system.

The reactor uses a central positioned led light that provides efficient light for the algae to grow.

The reactor includes a LED 12v light and adapter.

Light pollution is kept to a minimum with the use of a white pvc sleeve over an acrylic body. A viewing glass is situated on the body for ease of viewing algae growth.

Kit includes:

Algae reactor, pvc unions x 2, control valve, and 1.5m extension lead for the 12v adapter.

 

Pump Requirement: 500lph - 800lph

Algae Capacity: 3 litres

Power Consumption : 15w

 

Dimensions (mm):  

Height:         450       

Footprint:     165       

Column Dia: 150

Hosetail Dia:12

Quantity:
Buy Now:

 

Kit includes:

Algae reactor, pvc unions x 2, control valve, and 1.5m extension lead for the 12v adapter.

 

Pump Requirement: 1000lph - 1500lph

Algae Capacity: 6 litres

Power Consumption : 30w

 

Dimensions (mm):  

Height:         650       

Footprint:     165       

Column Dia:  150

Hosetail Dia: 12

Quantity:
Buy Now: